ASEAN - Power Tools - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingASEAN: Power Tool Market 2024
Power Tool Market Size in ASEAN
In 2023, after three years of growth, there was significant decline in the ASEAN power tool market, when its value decreased by X% to $X. Over the period under review, consumption recorded a abrupt downturn. Over the period under review, the market reached the maximum level at $X in 2018; however, from 2019 to 2023, consumption stood at a somewhat lower figure.
Power Tool Production in ASEAN
In value terms, power tool production expanded to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern remained relatively stable, with somewhat noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2018 with an increase of X% against the previous year. As a result, production reached the peak level of $X. From 2019 to 2023, production growth remained at a lower figure.
Power Tool Exports
Exports in ASEAN
After three years of growth, overseas shipments of power tools decreased by X% to X units in 2023. Over the period under review, exports showed a slight reduction. The growth pace was the most rapid in 2020 when exports increased by X% against the previous year. Over the period under review, the exports hit record highs at X units in 2022, and then fell sharply in the following year.
In value terms, power tool exports shrank significantly to $X in 2023. In general, exports recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2013 with an increase of X%. Over the period under review, the exports reached the peak figure at $X in 2022, and then shrank markedly in the following year.
Exports by Country
Malaysia was the major exporter of power tools in ASEAN, with the volume of exports accounting for X units, which was near X% of total exports in 2023. Thailand (X units) took a X% share (based on physical terms) of total exports, which put it in second place, followed by Singapore (X%).
From 2012 to 2023, the biggest increases were recorded for Thailand (with a CAGR of X%), while shipments for the other leaders experienced a decline in the exports figures.
In value terms, Malaysia ($X) remains the largest power tool supplier in ASEAN, comprising X% of total exports. The second position in the ranking was held by Thailand ($X), with a X% share of total exports.
In Malaysia, power tool exports decreased by an average annual rate of X% over the period from 2012-2023. The remaining exporting countries recorded the following average annual rates of exports growth: Thailand (X% per year) and Singapore (X% per year).
Export Prices by Country
In 2023, the export price in ASEAN amounted to $X per unit, shrinking by X% against the previous year. Over the period from 2012 to 2023, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2021 an increase of X% against the previous year. As a result, the export price reached the peak level of $X per unit. From 2022 to 2023, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Malaysia ($X per unit), while Thailand ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Malaysia (X%), while the other leaders experienced mixed trends in the export price figures.
Power Tool Imports
Imports in ASEAN
Power tool imports expanded rapidly to X units in 2023, rising by X% against the previous year. Total imports indicated buoyant growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 when imports increased by X%. As a result, imports reached the peak of X units. From 2022 to 2023, the growth of imports remained at a lower figure.
In value terms, power tool imports totaled $X in 2023. Over the period under review, imports, however, saw a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. As a result, imports attained the peak of $X. From 2022 to 2023, the growth of imports remained at a somewhat lower figure.
Imports by Country
In 2023, Thailand (X units) and the Philippines (X units) represented the key importers of power tools in ASEAN, together committing X% of total imports. Malaysia (X units) ranks next in terms of the total imports with an X% share, followed by Vietnam (X%), Indonesia (X%) and Singapore (X%). Myanmar (X units) held a minor share of total imports.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by Myanmar (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Thailand ($X), Indonesia ($X) and Vietnam ($X) were the countries with the highest levels of imports in 2023, together comprising X% of total imports. Malaysia, the Philippines, Singapore and Myanmar lagged somewhat behind, together accounting for a further X%.
Myanmar, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in ASEAN stood at $X per unit in 2023, falling by X% against the previous year. Overall, the import price showed a pronounced decline. The pace of growth was the most pronounced in 2022 when the import price increased by X% against the previous year. Over the period under review, import prices attained the peak figure at $X per unit in 2013; however, from 2014 to 2023, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Indonesia ($X per unit), while the Philippines ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the power tool market in ASEAN. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28241113 - Electromechanical hand drills operated without an external source of power
- Prodcom 28241115 - Electropneumatic drills of all kinds for working in the hand
- Prodcom 28241117 - Electromechanical hand drills of all kinds (excluding those operated without an external source of power, e lectropneumatic)
- Prodcom 28241120 - Electromechanical hand tools operated without an external source of power (excluding drills, saws )
- Prodcom 28241123 - Electromechanical chainsaws
- Prodcom 28241125 - Electromechanical circular saws
- Prodcom 28241127 - Electromechanical handsaws (excluding chainsaws, circular saws)
- Prodcom 28241133 -
- Prodcom 28241135 -
- Prodcom 28241150 - Grinders, sanders and planers, for working in the hand, with self-contained electric motor, operating with an external source of power
- Prodcom 28241180 - Electromechanical hedge trimmers and lawn edge cutters
- Prodcom 28241185 - Electromechanical hand tools, with self-contained electric motor operating with an external source of power (excluding saws, drills, grinders, sanders, planers, hedge trimmers and lawn edge cutters)
- Prodcom 28241190 -
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ASEAN, split by region and country
- Trade (exports and imports) in ASEAN
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the power tool market in Asia.
This report provides an in-depth analysis of the power tool market in the U.S..
This report provides an in-depth analysis of the power tool market in China.
This report provides an in-depth analysis of the power tool market in the EU.
This report provides an in-depth analysis of the global power tool market.