Northern America - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNorthern America: Compression Type Mould Market 2024
Compression Type Mould Market Size in Northern America
In 2023, the North American compression type mould market decreased by X% to $X for the first time since 2013, thus ending a nine-year rising trend. Over the period under review, consumption, however, posted a prominent increase. Over the period under review, the market reached the maximum level at $X in 2022, and then reduced in the following year.
Compression Type Mould Production in Northern America
In value terms, compression type mould production reduced slightly to $X in 2023 estimated in export price. Overall, production, however, continues to indicate prominent growth. The pace of growth was the most pronounced in 2020 when the production volume increased by X%. As a result, production reached the peak level of $X; afterwards, it flattened through to 2023.
Compression Type Mould Exports
Exports in Northern America
In 2023, the amount of injection or compression type moulds for rubber or plastics exported in Northern America contracted significantly to X units, waning by X% compared with 2022 figures. In general, exports saw a slight decline. The most prominent rate of growth was recorded in 2022 when exports increased by X%. The volume of export peaked at X units in 2013; however, from 2014 to 2023, the exports remained at a lower figure.
In value terms, compression type mould exports expanded remarkably to $X in 2023. The total export value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2017 with an increase of X% against the previous year. The level of export peaked at $X in 2018; afterwards, it flattened through to 2023.
Exports by Country
Canada represented the largest exporter of injection or compression type moulds for rubber or plastics in Northern America, with the volume of exports resulting at X units, which was approx. X% of total exports in 2023. It was distantly followed by the United States (X units), comprising a X% share of total exports.
Canada was also the fastest-growing in terms of the injection or compression type moulds for rubber or plastics exports, with a CAGR of X% from 2012 to 2023. The United States (X%) illustrated a downward trend over the same period. While the share of Canada (X p.p.) increased significantly in terms of the total exports from 2012-2023, the share of the United States (X p.p.) displayed negative dynamics.
In value terms, Canada ($X) and the United States ($X) appeared to be the countries with the highest levels of exports in 2023.
Canada, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, in terms of the main exporting countries over the period under review.
Export Prices by Country
In 2023, the export price in Northern America amounted to $X per unit, jumping by X% against the previous year. Export price indicated noticeable growth from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, compression type mould export price decreased by X% against 2021 indices. The level of export peaked at $X per unit in 2021; however, from 2022 to 2023, the export prices remained at a lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was the United States ($X per unit), while Canada totaled $X per unit.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the United States (X%).
Compression Type Mould Imports
Imports in Northern America
After two years of growth, supplies from abroad of injection or compression type moulds for rubber or plastics decreased by X% to X units in 2023. Over the period under review, imports recorded a perceptible descent. The pace of growth was the most pronounced in 2017 with an increase of X%. As a result, imports attained the peak of X units. From 2018 to 2023, the growth of imports remained at a somewhat lower figure.
In value terms, compression type mould imports reduced slightly to $X in 2023. The total import value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The growth pace was the most rapid in 2017 when imports increased by X%. The level of import peaked at $X in 2018; however, from 2019 to 2023, imports failed to regain momentum.
Imports by Country
The United States was the major importer of injection or compression type moulds for rubber or plastics in Northern America, with the volume of imports reaching X units, which was approx. X% of total imports in 2023. It was distantly followed by Canada (X units), generating a X% share of total imports.
The United States was also the fastest-growing in terms of the injection or compression type moulds for rubber or plastics imports, with a CAGR of X% from 2012 to 2023. Canada (X%) illustrated a downward trend over the same period. The shares of the largest importers remained relatively stable throughout the analyzed period.
In value terms, the United States ($X) constitutes the largest market for imported injection or compression type moulds for rubber or plastics in Northern America, comprising X% of total imports. The second position in the ranking was taken by Canada ($X), with an X% share of total imports.
From 2012 to 2023, the average annual growth rate of value in the United States amounted to X%.
Import Prices by Country
In 2023, the import price in Northern America amounted to $X per unit, growing by X% against the previous year. Import price indicated a remarkable increase from 2012 to 2023: its price increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, compression type mould import price increased by X% against 2019 indices. The pace of growth appeared the most rapid in 2020 when the import price increased by X%. The level of import peaked in 2023 and is expected to retain growth in years to come.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was the United States ($X per unit), while Canada totaled $X per unit.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the United States (X%).
Source: IndexBox Platform
This report provides an in-depth analysis of the compression type mould market in Northern America. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Bermuda
- Canada
- Greenland
- Saint Pierre and Miquelon
- United States
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Northern America, split by region and country
- Trade (exports and imports) in Northern America
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Bermuda
- Canada
- Greenland
- Saint Pierre and Miquelon
- United States
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.