Eastern Asia - Moulds for Mineral Materials - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEastern Asia: Market for Moulds For Mineral Materials 2024
Market Size for Moulds For Mineral Materials in Eastern Asia
The East Asian mould for mineral materials market expanded modestly to $X in 2023, increasing by X% against the previous year. Overall, consumption enjoyed a buoyant expansion. The level of consumption peaked at $X in 2021; afterwards, it flattened through to 2023.
Production of Moulds For Mineral Materials in Eastern Asia
In value terms, mould for mineral materials production rose slightly to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; the trend pattern remained relatively stable, with somewhat noticeable fluctuations being observed in certain years. The pace of growth appeared the most rapid in 2020 when the production volume increased by X%. The level of production peaked at $X in 2021; however, from 2022 to 2023, production remained at a lower figure.
Exports of Moulds For Mineral Materials
Exports in Eastern Asia
In 2023, after three years of decline, there was growth in shipments abroad of moulds for mineral materials, when their volume increased by X% to X units. Over the period under review, exports, however, saw a deep contraction. The most prominent rate of growth was recorded in 2015 with an increase of X%. The volume of export peaked at X units in 2019; however, from 2020 to 2023, the exports remained at a lower figure.
In value terms, mould for mineral materials exports shrank to $X in 2023. The total export value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X%. Over the period under review, the exports reached the maximum at $X in 2022, and then shrank in the following year.
Exports by Country
South Korea represented the main exporting country with an export of about X units, which resulted at X% of total exports. China (X units) took a X% share (based on physical terms) of total exports, which put it in second place, followed by Japan (X%).
South Korea experienced a relatively flat trend pattern with regard to volume of exports of moulds for mineral materials. At the same time, Japan (X%) displayed positive paces of growth. Moreover, Japan emerged as the fastest-growing exporter exported in Eastern Asia, with a CAGR of X% from 2012-2023. By contrast, China (X%) illustrated a downward trend over the same period. While the share of South Korea (X p.p.) and Japan (X p.p.) increased significantly in terms of the total exports from 2012-2023, the share of China (X p.p.) displayed negative dynamics.
In value terms, China ($X) remains the largest mould for mineral materials supplier in Eastern Asia, comprising X% of total exports. The second position in the ranking was held by Japan ($X), with a X% share of total exports.
In China, mould for mineral materials exports expanded at an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: Japan (X% per year) and South Korea (X% per year).
Export Prices by Country
In 2023, the export price in Eastern Asia amounted to $X per unit, dropping by X% against the previous year. In general, the export price, however, showed a strong increase. The most prominent rate of growth was recorded in 2020 when the export price increased by X% against the previous year. Over the period under review, the export prices hit record highs at $X per unit in 2022, and then dropped in the following year.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was China ($X per unit), while South Korea ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by China (X%), while the other leaders experienced a decline in the export price figures.
Imports of Moulds For Mineral Materials
Imports in Eastern Asia
In 2023, purchases abroad of moulds for mineral materials increased by X% to X units, rising for the third consecutive year after three years of decline. Overall, imports posted a prominent increase. The most prominent rate of growth was recorded in 2017 when imports increased by X%. Over the period under review, imports hit record highs in 2023 and are expected to retain growth in the immediate term.
In value terms, mould for mineral materials imports declined to $X in 2023. Total imports indicated pronounced growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2017 with an increase of X% against the previous year. As a result, imports reached the peak of $X. From 2018 to 2023, the growth of imports remained at a somewhat lower figure.
Imports by Country
South Korea (X units) and Hong Kong SAR (X units) prevails in imports structure, together constituting X% of total imports. Taiwan (Chinese) (X units) took a X% share (based on physical terms) of total imports, which put it in second place, followed by China (X%). The following importers - Japan (X units) and Macao SAR (X units) - together made up X% of total imports.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by Macao SAR (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest mould for mineral materials importing markets in Eastern Asia were South Korea ($X), China ($X) and Hong Kong SAR ($X), together comprising X% of total imports. Taiwan (Chinese), Japan and Macao SAR lagged somewhat behind, together comprising a further X%.
In terms of the main importing countries, Macao SAR, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Eastern Asia stood at $X per unit in 2023, falling by X% against the previous year. Over the period under review, the import price saw a abrupt decrease. The most prominent rate of growth was recorded in 2019 an increase of X% against the previous year. The level of import peaked at $X per unit in 2015; however, from 2016 to 2023, import prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was China ($X per unit), while Hong Kong SAR ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by South Korea (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for mould for mineral materials in Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735060 - Moulds for mineral materials
Country coverage:
- China
- Democratic People's Republic of Korea
- Hong Kong SAR
- Japan
- Macao SAR
- South Korea
- Taiwan (Chinese)
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Eastern Asia, split by region and country
- Trade (exports and imports) in Eastern Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- China
- Hong Kong SAR
- Macao SAR
- Japan
- South Korea
- Taiwan (Chinese)
- Democratic People's Republic of Korea
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for mould for mineral materials in Asia.
This report provides an in-depth analysis of the market for mould for mineral materials in the U.S..
This report provides an in-depth analysis of the market for mould for mineral materials in China.
This report provides an in-depth analysis of the market for mould for mineral materials in the EU.
This report provides an in-depth analysis of the global market for mould for mineral materials.