Mexico - Iron, Steel or Aluminium Reservoirs, Tanks, Vats and Similar Containers - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMexico: Market for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers 2024
Market Size for Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Mexico
The Mexican market for iron, steel or aluminium reservoirs, tanks, vats and similar containers reached $X in 2020, remaining constant against the previous year. The market value increased at an average annual rate of X% from 2012 to 2020; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. Iron, steel or aluminium reservoir consumption peaked in 2020 and is expected to retain growth in years to come.
Production of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers in Mexico
In value terms, iron, steel or aluminium reservoir production expanded modestly to $X in 2020 estimated in export price. Over the period under review, the total production indicated a prominent expansion from 2012 to 2020: its value increased at an average annual rate of X% over the last eight-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2020 figures, production increased by X% against 2016 indices. The pace of growth was the most pronounced in 2018 with an increase of X%. Over the period under review, production attained the peak level in 2020 and is likely to see gradual growth in years to come.
Exports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Exports from Mexico
After three years of growth, shipments abroad of iron, steel or aluminium reservoirs, tanks, vats and similar containers decreased by X% to X units in 2020. Overall, exports, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2017 with an increase of X%. Over the period under review, the exports attained the peak figure at X units in 2019, and then fell remarkably in the following year.
In value terms, iron, steel or aluminium reservoir exports reduced remarkably to $X in 2020. In general, exports, however, saw a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when exports increased by X%. The exports peaked at $X in 2019, and then declined significantly in the following year.
Exports by Country
The United States (X units) was the main destination for iron, steel or aluminium reservoir exports from Mexico, accounting for a approx. X% share of total exports.
From 2012 to 2020, the average annual rate of growth in terms of volume to the United States totaled X%.
In value terms, the United States ($X) also remains the key foreign market for iron, steel or aluminium reservoirs, tanks, vats and similar containers exports from Mexico.
From 2012 to 2020, the average annual rate of growth in terms of value to the United States totaled X%.
Export Prices by Country
The average export price for iron, steel or aluminium reservoirs, tanks, vats and similar containers stood at $X per unit in 2020, declining by X% against the previous year. In general, the export price, however, recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2018 when the average export price increased by X%. Over the period under review, the average export prices reached the maximum at $X per unit in 2013; however, from 2014 to 2020, the export prices failed to regain momentum.
As there is only one major export destination, the average price level is determined by prices for the United States.
From 2012 to 2020, the rate of growth in terms of prices for the United States amounted to X% per year.
Imports of Iron, Steel Or Aluminium Reservoirs, Tanks, Vats And Similar Containers
Imports into Mexico
In 2020, iron, steel or aluminium reservoir imports into Mexico shrank notably to X units, waning by X% against the previous year. Over the period under review, imports, however, showed a relatively flat trend pattern. The pace of growth was the most pronounced in 2018 with an increase of X% against the previous year. As a result, imports attained the peak of X units. From 2019 to 2020, the growth of imports failed to regain momentum.
In value terms, iron, steel or aluminium reservoir imports reduced to $X in 2020. In general, imports, however, recorded a relatively flat trend pattern. The pace of growth was the most pronounced in 2016 when imports increased by X%. Imports peaked at $X in 2018; however, from 2019 to 2020, imports stood at a somewhat lower figure.
Imports by Country
In 2020, the United States (X units) constituted the largest iron, steel or aluminium reservoir supplier to Mexico, accounting for a X% share of total imports. Moreover, iron, steel or aluminium reservoir imports from the United States exceeded the figures recorded by the second-largest supplier, China (X units), threefold.
From 2012 to 2020, the average annual rate of growth in terms of volume from the United States was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Italy (X% per year).
In value terms, the United States ($X) constituted the largest supplier of iron, steel or aluminium reservoirs, tanks, vats and similar containers to Mexico, comprising X% of total imports. The second position in the ranking was taken by China ($X), with a X% share of total imports.
From 2012 to 2020, the average annual growth rate of value from the United States was relatively modest. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and Italy (X% per year).
Import Prices by Country
The average import price for iron, steel or aluminium reservoirs, tanks, vats and similar containers stood at $X per unit in 2020, with an increase of X% against the previous year. Over the period under review, the import price showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2013 an increase of X% against the previous year. As a result, import price reached the peak level of $X per unit. From 2014 to 2020, the average import prices failed to regain momentum.
There were significant differences in the average prices amongst the major supplying countries. In 2020, amid the top importers, the country with the highest price was Italy ($X per unit), while the price for China ($X per unit) was amongst the lowest.
From 2012 to 2020, the most notable rate of growth in terms of prices was attained by Italy (X%), while the prices for the other major suppliers experienced mixed trend patterns.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Mexico. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25291110 - Iron or steel reservoirs, tanks, vats and similar containers for gases, of a capacity > .300 litres (excluding compressed or liquefied gas, fitted with mechanical or thermal equipment)
- Prodcom 25291120 - Iron or steel reservoirs, tanks, vats and similar containers lined or heat-insulated, for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291130 - Iron or steel reservoirs, tanks, vats and similar containers for liquids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment, lined or heat insulated)
- Prodcom 25291150 - Iron or steel reservoirs, tanks, vats and similar containers for solids, of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291170 - Aluminium reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of a capacity > .300 litres (excluding fitted with mechanical or thermal equipment)
- Prodcom 25291200 - Containers for compressed or liquefied gas, of metal
Country coverage:
- Mexico
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Mexico
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in Asia.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the U.S..
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in China.
This report provides an in-depth analysis of the market for iron, steel or aluminium reservoir in the EU.
This report provides an in-depth analysis of the global market for iron, steel or aluminium reservoir.